> For the complete documentation index, see [llms.txt](https://wiki.retrobat.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/game-consoles/laseractive.md).

# Pioneer LaserActive

Pioneer

<div align="left"><figure><img src="https://990680527-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FexdzL60ZuqPLldz2AYta%2Fuploads%2FrRjC8dA2vytMXZLlGxAn%2Fimage.png?alt=media&amp;token=0df84be4-c2e4-40d8-b5f9-c4570e2587a6" alt="" width="480"><figcaption></figcaption></figure></div>

## Overview

The **LaserActive** is a Pioneer LaserDisc player released in 1993 (CLD-A100). It becomes a game console with modules inserted at the front, the "PACs":

* the **Mega-LD PAC** (Sega) plays Mega-LD discs, as well as Mega Drive cartridges and Mega-CD discs;
* the **LD-ROM² PAC** (NEC) plays LD-ROM² discs, as well as PC Engine HuCards and CD-ROM² discs.

LaserActive games mix the analog LaserDisc video with the game data: high-quality full-motion video, interactive movies, shooters over video backgrounds. About 24 Mega-LD and 14 LD-ROM² games were released, such as **Pyramid Patrol**, **Hyperion**, **Triad Stone**, **J.B. Harold: Blue Chicago Blues** (Mega-LD) or **Vajra** and **Road Prosecutor** (LD-ROM²).

Emulation is recent: ares is the first emulator to run the Mega-LD (2025), then the LD-ROM². RetroBat offers **ares** with two cores, one per PAC (**MegaLD** by default, **NecLD**), and the **geargrafx** libretro core (LD-ROM² only).

Mega Drive, Mega-CD and PC Engine games are launched from their own systems: this system is only for LaserActive discs.

{% embed url="<https://en.wikipedia.org/wiki/LaserActive>" %}

## At a glance

<table><thead><tr><th width="235.25"></th><th></th></tr></thead><tbody><tr><td><strong>Games folder</strong></td><td><code>roms\laseractive</code></td></tr><tr><td><strong>Extensions</strong></td><td>.mmi</td></tr><tr><td><strong>Default emulator</strong></td><td>ares (MegaLD)</td></tr><tr><td><strong>BIOS</strong></td><td>Required, one per PAC (see below)</td></tr><tr><td><strong>Controller setup</strong></td><td>Automatic, every emulator</td></tr><tr><td><strong>Save states</strong></td><td>geargrafx core; ares with hotkeys (not managed by RetroBat)</td></tr><tr><td><strong>RetroAchievements</strong></td><td>No</td></tr><tr><td><strong>Netplay</strong></td><td>geargrafx core (LD-ROM²)</td></tr><tr><td><strong>Light guns</strong></td><td>—</td></tr><tr><td><strong>Wheels</strong></td><td>—</td></tr><tr><td><strong>Optional BIOS</strong></td><td><code>syscard1.pce</code>, <code>gexpress.pce</code> in <code>bios</code> (some LD-ROM² games)</td></tr></tbody></table>

## Which emulator should I use?

The core depends on the disc: a Mega-LD disc only runs with **MegaLD**, an LD-ROM² disc only with **NecLD** or **geargrafx**. LD-ROM² games must therefore be set to one of these two cores.

<table><thead><tr><th width="182">Emulator</th><th>Strengths</th><th>Limitations</th></tr></thead><tbody><tr><td><strong>ares: MegaLD</strong> (default)</td><td>Only Mega-LD emulator. Every Mega-LD game dumped so far is playable.</td><td>Mega-LD discs only. Save states not managed by RetroBat.</td></tr><tr><td><strong>ares: NecLD</strong></td><td>Original LD-ROM² emulation, by the author of the Mega-LD emulation.</td><td>LD-ROM² discs only. Save states not managed by RetroBat.</td></tr><tr><td><strong>libretro: geargrafx</strong></td><td>LD-ROM² in RetroArch: save states managed by RetroBat, shaders, netplay.</td><td>LD-ROM² discs only.</td></tr></tbody></table>

## BIOS

Each PAC has its own BIOS: place the one for the PAC of your games (or both) in `bios\laseractive`.

**Mega-LD PAC (ares MegaLD)**: the BIOS matching the disc region (US or Japan) is required.

<table><thead><tr><th>File</th><th width="134.5">Region</th><th>Folder</th></tr></thead><tbody><tr><td><code>[BIOS] LaserActive PAC-S10 (US) (v1.04).bin</code></td><td>US</td><td><code>bios\laseractive</code></td></tr><tr><td><code>[BIOS] LaserActive PAC-S1 (Japan) (v1.05).bin</code></td><td>Japan</td><td><code>bios\laseractive</code></td></tr></tbody></table>

RetroBat also accepts older versions, when the previous one is missing: `[BIOS] LaserActive PAC-S10 (US) (v1.02).bin`, `[BIOS] LaserActive PAC-S1 (Japan) (v1.02).bin` and `[BIOS] LaserActive PAC-S1 (Japan) (v1.01).bin`.

**LD-ROM² PAC (ares NecLD, geargrafx core)**: one of these files is enough.

<table><thead><tr><th width="326">File</th><th width="174.5">Region</th><th>Folder</th></tr></thead><tbody><tr><td><code>[BIOS] LaserActive PAC-N10 (US) (v1.02).bin</code></td><td>US</td><td><code>bios\laseractive</code></td></tr><tr><td><code>[BIOS] LaserActive PAC-N1 (Japan) (v1.02).bin</code></td><td>Japan</td><td><code>bios\laseractive</code></td></tr><tr><td><code>[BIOS] LaserActive PCE-LP1 (Japan) (v1.02).bin</code></td><td>Japan (PAC sold by NEC)</td><td><code>bios\laseractive</code></td></tr></tbody></table>

The geargrafx core uses the same files: RetroBat copies them to the root of `bios` under the names the core expects (`pac-n10.bin`, `pac-n1.bin`, `pce-lp1.bin`).

**Optional BIOS (ares NecLD, geargrafx core)**: some LD-ROM² games need a PC Engine card inserted in the console.

| File           | Description                    | Folder |
| -------------- | ------------------------------ | ------ |
| `syscard1.pce` | System Card 1.0 (PC Engine CD) | `bios` |
| `gexpress.pce` | Games Express                  | `bios` |

With the geargrafx core, **EMULATION > CDROM BIOS** selects the System Card used by these games: SYSTEM CARD 1 by default if `syscard1.pce` is present, otherwise SYSTEM CARD 3 (`syscard3.pce`).

## Which game format?

<table><thead><tr><th width="149">Format</th><th>Description</th></tr></thead><tbody><tr><td><strong>.mmi</strong></td><td>Mixed Media Image: one file per disc side, with the video, the sound and the game data. It is the only format read by ares and geargrafx.</td></tr></tbody></table>

* Files are very large: 28 to 36 GB per side for most games, more for some.
* The format is already compressed: do not put it in a `.zip` or `.7z` archive.
* Put the games on an **SSD**: a regular hard drive is too slow to read the video without stutter.
* A recent mid-range PC is enough to play at full speed.

## Controls

### Automatic setup

**Mega-LD PAC (ares MegaLD)**: 6-button Mega Drive controller.

<table><thead><tr><th width="249">RetroBat controller</th><th>Mega Drive</th></tr></thead><tbody><tr><td>WEST / SOUTH / EAST</td><td>A / B / C</td></tr><tr><td>L1 / NORTH / R1</td><td>X / Y / Z</td></tr><tr><td>START</td><td>START</td></tr><tr><td>SELECT</td><td>MODE</td></tr><tr><td>D-pad</td><td>D-pad</td></tr></tbody></table>

<div align="left"><figure><img src="https://990680527-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FexdzL60ZuqPLldz2AYta%2Fuploads%2FA7AKVEKPc0nQpCJNyaC7%2Fimage.png?alt=media&amp;token=f2069183-6443-4da4-83ce-47449833f041" alt="" width="225"><figcaption></figcaption></figure></div>

**LD-ROM² PAC (ares NecLD, geargrafx core)**: PC Engine controller.

<table><thead><tr><th width="230.25">RetroBat controller</th><th>PC Engine</th></tr></thead><tbody><tr><td>EAST / SOUTH</td><td>I / II</td></tr><tr><td>START</td><td>RUN</td></tr><tr><td>SELECT</td><td>SELECT</td></tr><tr><td>D-pad</td><td>D-pad</td></tr></tbody></table>

With the geargrafx core, **CONTROLS > CONTROLLER TYPE** selects the controller: PC ENGINE PAD (default), AVENUE PAD 3 or AVENUE PAD 6. **CONTROLS > USE TURBO-TAP** plugs in the multitap.

<div align="left"><figure><img src="https://990680527-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FexdzL60ZuqPLldz2AYta%2Fuploads%2FGboyXc3rLsms1YCJ5UUL%2Fimage.png?alt=media&amp;token=3a1fbd2b-d2c9-4d91-9cbd-d3169404af1a" alt="" width="225"><figcaption></figcaption></figure></div>

### Hotkeys

ares uses the RetroBat hotkeys (through PadToKey):

<table><thead><tr><th width="203.25">Action</th><th width="222">Controller</th><th>Keyboard</th></tr></thead><tbody><tr><td>Exit</td><td>HOTKEY + START</td><td><code>Esc</code></td></tr><tr><td>Pause</td><td>HOTKEY + SOUTH</td><td><code>P</code></td></tr><tr><td>Save state</td><td>HOTKEY + WEST</td><td><code>F2</code></td></tr><tr><td>Load state</td><td>HOTKEY + NORTH</td><td><code>F4</code></td></tr><tr><td>Previous / next slot</td><td>HOTKEY + Down / Up</td><td><code>F6</code> / <code>F7</code></td></tr><tr><td>Rewind (if enabled)</td><td>HOTKEY + Left</td><td><code>Backspace</code></td></tr><tr><td>Fast forward (hold)</td><td>HOTKEY + Right</td><td><code>L</code></td></tr><tr><td>Screenshot</td><td>HOTKEY + R3</td><td><code>F8</code></td></tr><tr><td>Fullscreen</td><td>HOTKEY + L3</td><td><code>F</code></td></tr></tbody></table>

The geargrafx core uses the RetroArch hotkeys.

For more details, see the [**Hotkeys**](https://wiki.retrobat.org/navigation/hotkeys.md) page.

## Folders

<table><thead><tr><th width="259">Content</th><th>Folder</th></tr></thead><tbody><tr><td>Games</td><td><code>roms\laseractive</code></td></tr><tr><td>BIOS</td><td><code>bios\laseractive</code> (and <code>bios</code> for <code>syscard1.pce</code> and <code>gexpress.pce</code>)</td></tr><tr><td>ares: saves</td><td><code>saves\laseractive\ares</code></td></tr><tr><td>geargrafx core: saves</td><td><code>saves\laseractive</code></td></tr><tr><td>geargrafx core: save states</td><td><code>saves\laseractive\libretro.geargrafx</code></td></tr><tr><td>ares: screenshots</td><td><code>screenshots\ares</code></td></tr></tbody></table>

## Guides

### Changing disc side (ares)

Some games span several sides (**J.B. Harold: Blue Chicago Blues**, for example), with one `.mmi` file per side. ares has no hotkey to change side:

1. When the game asks you to flip the disc, switch to windowed mode with HOTKEY + L3 (or `F`).
2. In the ares menu bar, open **LaserActive (SEGA PAC) > Change Side** (or **LaserActive (NEC PAC) > Change Side**) and select the requested side.
3. Go back to fullscreen with HOTKEY + L3.

### LD-ROM² PAC region (geargrafx)

**EMULATION > LASERACTIVE REGION** selects the BIOS used: JAPAN (`PAC-N1` or `PCE-LP1`) or US (`PAC-N10`). By default, the core chooses automatically.

**VIDEO > LASERACTIVE ASPECT RATIO** changes the picture format: 4:3 by default, or 1:1 PAR, 16:9 DAR, 16:10 DAR.

## Known issues

<table><thead><tr><th width="354">Issue</th><th>Solution</th></tr></thead><tbody><tr><td>An LD-ROM² disc does not start</td><td>The game is launched with the MegaLD core (default): select the NecLD or geargrafx core for this game.</td></tr><tr><td>ares asks for the "Mega LD - BIOS (US)" or "(Japan)" firmware</td><td>The Mega-LD BIOS for the disc region is missing in <code>bios\laseractive</code>.</td></tr><tr><td>ares NecLD asks for the "PAC-N10 (US)" or "PAC-N1 (Japan)" firmware</td><td>No LD-ROM² BIOS in <code>bios\laseractive</code>: any of the three files is enough.</td></tr><tr><td>ares NecLD asks for the "System-Card 1.0" or "Games Express" firmware, or the geargrafx core does not start the game</td><td>This LD-ROM² game needs the matching PC Engine card: place <code>syscard1.pce</code> or <code>gexpress.pce</code> in <code>bios</code>.</td></tr><tr><td>The video stutters</td><td>Put the games on an SSD and do not compress them.</td></tr><tr><td>The game asks you to flip the disc</td><td>See <strong>Changing disc side</strong> in <a href="#changing-disc-side-ares"><strong>Guides</strong></a>.</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/game-consoles/laseractive.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
