> For the complete documentation index, see [llms.txt](https://wiki.retrobat.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/game-consoles/gx4000.md).

# Amstrad GX4000

Amstrad

<div align="left"><figure><img src="https://990680527-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FexdzL60ZuqPLldz2AYta%2Fuploads%2FV7jzf9tmgIOo50ElYFIC%2Fimage.png?alt=media&amp;token=71e90a7a-cb23-4334-b111-900046e4ec49" alt="" width="487"><figcaption></figcaption></figure></div>

## Overview

The **GX4000** is Amstrad's only game console, released in Europe in 1990. It is in fact an Amstrad 6128 Plus without keyboard or floppy drive: same Zilog Z80A processor at 4 MHz, 64 KB of memory, and above all the new features of the Plus range, namely a 4096-colour palette, 16 hardware sprites, hardware scrolling and stereo sound.

Games come on cartridge and start as soon as the console is switched on, with no command to type. The console was sold with two two-button controllers and the game Burnin' Rubber.

Launched at the same time as the Mega Drive and facing well-established 8-bit consoles, the GX4000 never found its audience: fewer than thirty games were released and it was withdrawn from sale in 1991. Notable titles include Burnin' Rubber, Pang, Navy Seals, RoboCop 2, Switchblade, Fire & Forget II and Tennis Cup 2.

GX4000 cartridges also work on the 464 Plus and 6128 Plus computers (see the [**Amstrad CPC**](https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/home-computer/amstrad-cpc.md) page).

{% embed url="<https://en.wikipedia.org/wiki/Amstrad_GX4000>" %}

## At a glance

<table><thead><tr><th width="235.25"></th><th></th></tr></thead><tbody><tr><td><strong>Games folder</strong></td><td><code>roms\gx4000</code></td></tr><tr><td><strong>Extensions</strong></td><td>.dsk .m3u .cpr .zip .7z</td></tr><tr><td><strong>Default emulator</strong></td><td>libretro: cap32</td></tr><tr><td><strong>BIOS</strong></td><td>None</td></tr><tr><td><strong>Controller configuration</strong></td><td>Automatic, all emulators</td></tr><tr><td><strong>Save states</strong></td><td>libretro cores</td></tr><tr><td><strong>RetroAchievements</strong></td><td>libretro cores</td></tr><tr><td><strong>Netplay</strong></td><td>libretro cores</td></tr><tr><td><strong>Light guns</strong></td><td>libretro cores</td></tr></tbody></table>

## Which emulator should I choose?

<table><thead><tr><th width="144">Emulator</th><th width="120.25">For whom?</th><th>Strengths</th><th>Limits</th></tr></thead><tbody><tr><td><strong>libretro: cap32</strong> (default)</td><td>Everyone</td><td>Save states, RetroAchievements, light guns, virtual keyboard, RetroArch features (shaders…).</td><td>—</td></tr><tr><td><strong>capriceforever</strong></td><td>Advanced users</td><td>Very accurate emulation of the Plus range.</td><td>No save states in RetroBat, no RetroAchievements.</td></tr></tbody></table>

**When in doubt, keep cap32.**

## BIOS

No BIOS is needed: the emulators already include the console system.

RetroBat sets the emulated machine itself: a 6128 Plus with cap32 as with Caprice Forever. With Caprice Forever, the **EMULATION > AMSTRAD MODEL** option lets you pick a 464 Plus or a French or Spanish version.

## Which game format?

<table><thead><tr><th width="140.25">Format</th><th width="112.5">cap32</th><th width="159.5">capriceforever</th><th>Notes</th></tr></thead><tbody><tr><td><strong>.cpr</strong></td><td>✔</td><td>✔</td><td>Cartridge. The format of GX4000 games.</td></tr><tr><td>.dsk</td><td>✔</td><td>✔</td><td>Floppy disk, for games made for the 464 Plus and 6128 Plus.</td></tr><tr><td>.m3u</td><td>✔</td><td>✔</td><td>Games on several disks (see the <a href="https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/home-computer/amstrad-cpc.md"><strong>Amstrad CPC</strong></a> page).</td></tr><tr><td>.zip / .7z</td><td>✔</td><td>✔ (extracted at launch)</td><td></td></tr></tbody></table>

## Controls

### Automatic configuration

RetroBat configures controllers automatically for all emulators (two controllers at most with Caprice Forever).

<table><thead><tr><th width="189.5">RetroBat controller</th><th width="206.5">cap32</th><th width="190.75">capriceforever</th></tr></thead><tbody><tr><td>D-pad / left stick</td><td>D-pad</td><td>D-pad</td></tr><tr><td>EAST</td><td>Button 1</td><td>Button 1</td></tr><tr><td>SOUTH</td><td>Button 2</td><td>Button 2</td></tr><tr><td>WEST</td><td>Combo key</td><td>—</td></tr><tr><td>L3</td><td>Virtual keyboard</td><td></td></tr></tbody></table>

On the real console, the **Pause** button is on the console itself. It matches the **P** key of the keyboard:

* with cap32, open the virtual keyboard with **L3** or **WEST + START**, move the cursor to **P** and press **EAST**;
* with a keyboard plugged into the PC, press **P**.

With cap32, the combo key, the virtual keyboard and the other buttons work as on Amstrad CPC (see the [**Amstrad CPC**](https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/home-computer/amstrad-cpc.md) page).

To configure your controllers yourself, turn off **AUTOCONFIGURE CONTROLLERS**.

### Hotkeys

**cap32** uses the RetroArch hotkeys (see the [Hotkeys](https://wiki.retrobat.org/navigation/hotkeys.md) page).

**Caprice Forever**: **HOTKEY + START** to quit.

## Folders

<table><thead><tr><th width="297.75">Content</th><th>Folder</th></tr></thead><tbody><tr><td>cap32 save states</td><td><code>saves\gx4000\libretro.cap32</code></td></tr><tr><td>Caprice Forever snapshots</td><td><code>saves\gx4000\capriceforever</code></td></tr><tr><td>Caprice Forever screenshots</td><td><code>screenshots\capriceforever</code></td></tr><tr><td>Caprice Forever cheats</td><td><code>cheats\capriceforever</code></td></tr><tr><td>Caprice Forever controller profiles</td><td><code>emulators\capriceforever\Profiles</code></td></tr></tbody></table>

## Guides

### Playing with a light gun (cap32)

Two GX4000 games are played with a light gun: **The Enforcer** and **Skeet Shoot**.

1. In the game options, turn on **GUNS > ENABLE GUN**.
2. Set **GUNS > LIGHTGUN MODE** to **PHASER**.

The **SHOW CROSSHAIR** option displays a crosshair on screen.

### Disk games

Disk games made for the 464 Plus and 6128 Plus also go in `roms\gx4000`: RetroBat runs them on a 6128 Plus. Automatic start, `.m3u` files and the `#COMMAND:` line work as on Amstrad CPC (see the [**Amstrad CPC**](https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/home-computer/amstrad-cpc.md) page).

## Known issues

<table><thead><tr><th width="341.5">Issue</th><th>Solution</th></tr></thead><tbody><tr><td>The game can't be paused</td><td>The console's Pause button is the <strong>P</strong> key: use the virtual keyboard (<strong>WEST + START</strong>) or a keyboard.</td></tr><tr><td>A disk game stays on the <code>Ready</code> screen</td><td>Try <strong>WEST + EAST</strong>, or force the launch command (see the <a href="https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/home-computer/amstrad-cpc.md"><strong>Amstrad CPC</strong></a> page).</td></tr><tr><td>The light gun doesn't respond</td><td>Check that <strong>LIGHTGUN MODE</strong> is set to <strong>PHASER</strong>.</td></tr><tr><td>The controller doesn't respond with Caprice Forever</td><td>The controller is not recognized: turn on <strong>KEYBOARD AS JOYSTICK</strong> or use cap32.</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/game-consoles/gx4000.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
