> For the complete documentation index, see [llms.txt](https://wiki.retrobat.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/arcade/namco2x6.md).

# Namco 246/256

Namco

<div align="left"><figure><img src="https://990680527-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FexdzL60ZuqPLldz2AYta%2Fuploads%2FOXkRwgoqbur9zPeLtSoW%2Fimage.png?alt=media&amp;token=d108fe5a-5736-4c4f-aaa2-94d9e1adcc64" alt="" width="563"><figcaption></figcaption></figure></div>

## Overview

The **Namco System 246** is an arcade system board released by Namco in 2001. It is built on the hardware of the Sony PlayStation 2 (the arcade "COH-H" models), with a few additions for arcade use: a JVS interface for the cabinet controls, a security dongle (a special memory card that contains the game software) and the game data on a CD, a DVD or a hard drive.

It was followed by the **System 256**, a faster revision used by games such as *Tekken 5*, and the **System Super 256**, made for *Time Crisis 4*. These boards are often called **System 2x6**.

Many famous arcade games ran on these boards: *Tekken 4* and *Tekken 5*, *Soulcalibur II* and *III*, *Time Crisis 3* and *4*, *Vampire Night*, *Ridge Racer V Arcade Battle*, *Wangan Midnight Maximum Tune*, *Cobra The Arcade*, *Bloody Roar 3*, *Super Dragon Ball Z*, *Mobile Suit Gundam* games and the *Taiko no Tatsujin* series.

{% embed url="<https://en.wikipedia.org/wiki/Namco_System_246>" %}

## At a glance

<table><thead><tr><th width="236.5"></th><th></th></tr></thead><tbody><tr><td><strong>Games folder</strong></td><td><code>roms\namco2x6</code></td></tr><tr><td><strong>Extensions</strong></td><td>.zip .m3u .acgame</td></tr><tr><td><strong>Default emulator</strong></td><td>pcsx2x6</td></tr><tr><td><strong>BIOS</strong></td><td><code>r27v1602f.7d</code> or <code>r27v1602f.8g</code> in <code>bios\pcsx2\bios</code></td></tr><tr><td><strong>Controller configuration</strong></td><td>Automatic, all emulators</td></tr><tr><td><strong>Save states</strong></td><td>play</td></tr><tr><td><strong>RetroAchievements</strong></td><td>No</td></tr><tr><td><strong>Netplay</strong></td><td>No</td></tr><tr><td><strong>Light guns</strong></td><td>pcsx2x6, play, TeknoParrot</td></tr><tr><td><strong>Wheels</strong></td><td>pcsx2x6, TeknoParrot</td></tr></tbody></table>

## Which emulator to choose?

<table><thead><tr><th width="125.75">Emulator</th><th>Strengths</th><th>Limits</th></tr></thead><tbody><tr><td><strong>pcsx2x6</strong> (default)</td><td>PCSX2 fork dedicated to System 246/256: best compatibility, high resolution, guns, wheels</td><td>Needs a System 246/256 BIOS and the game dongle dump</td></tr><tr><td>play</td><td>Works with MAME-style .zip romsets, no BIOS needed</td><td>Lower compatibility, one gun only (mouse aiming)</td></tr><tr><td>teknoparrot</td><td>Runs the games through TeknoParrot profiles (Play! or pcsx2x6 inside TeknoParrot)</td><td>Requires TeknoParrot and its game profiles</td></tr></tbody></table>

## BIOS

### BIOS files

The BIOS is only needed by **pcsx2x6**. Copy it to the `bios\pcsx2\bios` folder of RetroBat.

| BIOS file    | Board      |
| ------------ | ---------- |
| r27v1602f.7d | System 246 |
| r27v1602f.8g | System 256 |

{% hint style="info" %}
One BIOS is enough. RetroBat checks that at least one of these files is present.
{% endhint %}

### Which BIOS do I need?

* **r27v1602f.8g** (System 256) is recommended: it runs the System 256 games and the System 246 games.
* RetroBat chooses the BIOS automatically: the System 246 BIOS when the `.acgame` file of the game declares `platform=246`, the System 256 BIOS otherwise. If the chosen file is missing, the other one is used.
* To choose yourself, use the **FORCE BIOS** option (EMULATION submenu): SYSTEM 246 or SYSTEM 256.

<div align="left"><figure><img src="https://990680527-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FexdzL60ZuqPLldz2AYta%2Fuploads%2FQUA7NWVL9mKRfhUcRM8e%2Fimage.png?alt=media&amp;token=50042093-e6c3-421b-9e3b-4058801e591b" alt=""><figcaption></figcaption></figure></div>

* Play! and TeknoParrot do not use these files.

## Game formats

### pcsx2x6: .acgame files

An arcade game is made of several files: the game data (CD, DVD or hard drive image), a boot program (.elf), the security dongle (.ps2) and the settings of the machine (sram.bin). A small **.acgame** text file tells pcsx2x6 where to find them.

Example for a game whose ID is `NM00007`:

```
📁 roms\namco2x6
   📄 SoulCalibur II.acgame
   📂 NM00007
      📄 NM00007.chd      (game data)
      📄 boot.elf         (boot program)
      📄 sram.bin         (created at first launch if missing)
📁 saves\namco2x6\memcards
   📄 NM00007.ps2         (security dongle)
```

Content of `SoulCalibur II.acgame`:

```ini
[game]
gameid=NM00007
```

With recent versions of pcsx2x6, the **gameid** is the only mandatory entry: the other values are found automatically. You can still declare them:

<table><thead><tr><th width="157">Section</th><th>Entry</th><th>Description</th></tr></thead><tbody><tr><td>[game]</td><td>name</td><td>Game name</td></tr><tr><td>[game]</td><td>gameid</td><td>Game ID (mandatory)</td></tr><tr><td>[game]</td><td>platform</td><td><code>246</code>, <code>256</code> or <code>super256</code> (Time Crisis 4)</td></tr><tr><td>[data]</td><td>subdir</td><td>Game subfolder (default: the game ID)</td></tr><tr><td>[data]</td><td>elf</td><td>Boot program (default: <code>boot.elf</code>)</td></tr><tr><td>[data]</td><td>dongle</td><td>Dongle file in <code>saves\namco2x6\memcards</code> (default: <code>GAMEID.ps2</code>)</td></tr><tr><td>[data]</td><td>card</td><td>Second memory card, only for the Conquest mode of <em>Soulcalibur II</em></td></tr><tr><td>[data]</td><td>mediasrc</td><td>Game data file (default: <code>GAMEID.chd</code>)</td></tr><tr><td>[data]</td><td>media</td><td><code>CD</code>, <code>DVD</code> or <code>HDD</code></td></tr><tr><td>[data]</td><td>sram</td><td>Settings file (default: <code>sram.bin</code>)</td></tr><tr><td>[data]</td><td>256Region</td><td>Region of the System 256 (<code>ASIA4</code>, <code>ASIA5</code>, <code>JAPAN</code>), used by Taiko no Tatsujin</td></tr></tbody></table>

{% hint style="info" %}
The **.ps2** files are dumps of the game security dongle, not memory cards. pcsx2x6 is supplied with a script (`utils/arcade_game_template.py`) that creates a template .acgame file and boot program for each game.
{% endhint %}

All these information can be found on the PCSX2X6 emulator website :

{% embed url="<https://ps2homebrew-arcade.github.io/pcsx2x6/game_config/>" %}

### Play!: .zip and .m3u files

* Copy the game romset (**.zip**, MAME format) to `roms\namco2x6`. The file name must match the Play! arcade profile (for example `tekken4.zip`). If the game uses a disc or a hard drive image (.chd), put it in a subfolder with the same name as the game, like with MAME.
* For games without a .zip file, create an empty **.m3u** file named after the Play! arcade profile. The list of profiles is in `emulators\play\arcadedefs`.

### TeknoParrot

The game file must have the same name as the TeknoParrot profile (`emulators\teknoparrot\GameProfiles`). RetroBat reads the profile to know whether TeknoParrot must use Play! or pcsx2x6. See the TeknoParrot page for the installation of the games.

## Controls

### Controller autoconfiguration

| Emulator    | Autoconfig | Players |
| ----------- | ---------- | ------- |
| pcsx2x6     | Yes        | 2       |
| play        | Yes        | 2       |
| teknoparrot | Yes        | 2       |

### Arcade layout (pcsx2x6)

<table><thead><tr><th width="220.25">Arcade control</th><th>Your controller</th></tr></thead><tbody><tr><td>Coin</td><td>SELECT</td></tr><tr><td>Start</td><td>START</td></tr><tr><td>Joystick</td><td>D-pad</td></tr><tr><td>Buttons 1 to 4</td><td>WEST, NORTH, SOUTH, EAST</td></tr><tr><td>Test (service menu)</td><td>R3</td></tr><tr><td>Service</td><td>L3</td></tr></tbody></table>

For fighting games, the buttons follow the arcade layout: for example *Tekken* left punch WEST, right punch NORTH, left kick SOUTH, right kick EAST, and *Soulcalibur* A (horizontal) WEST, B (vertical) NORTH, G (guard) SOUTH, K (kick) EAST. Racing games use R2 to accelerate, L2 to brake and L1/R1 to shift gears.

Test and Service are only active when **ENABLE SERVICE MENU** is on (EMULATION submenu).

<div align="left"><figure><img src="https://990680527-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FexdzL60ZuqPLldz2AYta%2Fuploads%2FAjASStLwKm4s1MfFoWit%2Fimage.png?alt=media&amp;token=2f3ad986-0ca7-4195-a955-063b8a38cd82" alt=""><figcaption></figcaption></figure></div>

The **CONTROLLER LAYOUT** option (CONTROLS submenu) moves the shoulder buttons and triggers (MODERN 8 BUTTONS, 8 BUTTONS ALTERNATIVE).

<div align="left"><figure><img src="https://990680527-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FexdzL60ZuqPLldz2AYta%2Fuploads%2FopVFgRAs1SmV8XCummh8%2Fimage.png?alt=media&amp;token=4c3c6f6e-0a60-4d4e-b059-1c0770f2ee84" alt=""><figcaption></figcaption></figure></div>

### Keyboard and arcade sticks

| Action        | Keyboard (QWERTY) | Keyboard (AZERTY) |
| ------------- | ----------------- | ----------------- |
| Coin P1 / P2  | 5 / 6             | ( / -             |
| Start P1 / P2 | 1 / 2             | & / é             |
| Test          | 0                 | à                 |
| Service       | 9                 | ç                 |

RetroBat detects AZERTY keyboards automatically; the **AZERTY KEYBOARD** option forces it. For arcade sticks recognized as a keyboard (IPAC, X-Arcade), use **CONFIGURE SPECIAL KEYBOARD STICK** (CONTROLS submenu).

### Play! controls

RetroBat configures the Play! buttons game by game, with the `system\resources\inputmapping\play.yml` file. Fighting games have the same buttons as with pcsx2x6, and the **CONTROLLER LAYOUT** option (CONTROLS submenu) places the buttons for arcade sticks.

<table><thead><tr><th width="220.25">Arcade control</th><th>Your controller</th></tr></thead><tbody><tr><td>Coin</td><td>SELECT</td></tr><tr><td>Start</td><td>START</td></tr><tr><td>Joystick</td><td>D-pad</td></tr><tr><td>Test (service menu)</td><td>R3</td></tr></tbody></table>

* **Service menu:** Play! opens it when L3 and R3 are pressed together, RetroBat puts both on R3. In games that use the button 5 of the cabinet, press R3 and that button: right kick (EAST) in *Tekken 4*, *Tekken 5* and *Pride GP 2003*, jump (SOUTH) in *Super Dragon Ball Z*. With Play!, the service menu is always active (no ENABLE SERVICE MENU option) and there is no Service button.
* **Racing games** (*Ace Driver 3*, *Wangan Midnight*, *Battle Gear 3*, *Moto GP*, *Ridge Racer V*): steering on the left stick, gas on R2, brake on L2, gear shifting on L1 / R1 in the games that have gears. Play! does not support real wheels.
* **Shooting games** (*Time Crisis 3* and *4*, *Cobra The Arcade*, *Vampire Night*): you aim with the mouse. With a controller, shoot with R2 and pedal with L2 (no pedal in *Vampire Night*). With a gun, see Light guns below.
* Games without settings in `play.yml` (*Taiko no Tatsujin*, *Bloody Roar 3*, *Zoids Infinity*…) use the PS2 layout: SOUTH = ✕, EAST = ○, WEST = □, NORTH = △, and L1 / R1 / L2 / R2.

To change the buttons of a game, copy `play.yml` to `user\inputmapping` and edit the copy. Each game is a block named after the game (for example `tekken4`), with one line per controller button (`south`, `east`, `west`, `north`, `l1`, `r1`, `l2`, `r2`, `l3`, `r3`, `select`, `start`) and the cabinet control (`Button1` to `Button10`, `gas` for the accelerator, `brake` for the brake):

```yaml
tekken4:
  west: Button1   # left punch
  north: Button2  # right punch
  south: Button4  # left kick
  east: Button5   # right kick
```

A `<game>_modern8`, `<game>_8alternative` or `<game>_6alternative` block is used instead when the CONTROLLER LAYOUT option has that value. A clone uses the block of its parent game.

If you disable **AUTOCONFIGURE CONTROLLERS**, Play! uses the input profile named after the game in `emulators\play\Play Data Files\inputprofiles` (or the default profile).

### Hotkeys

<table><thead><tr><th width="228.25">Hotkey</th><th>pcsx2x6</th><th>Play!</th></tr></thead><tbody><tr><td>HOTKEY + START</td><td>Quit</td><td>Quit</td></tr><tr><td>HOTKEY + SOUTH</td><td>Menu</td><td></td></tr><tr><td>HOTKEY + WEST</td><td>Save state</td><td>Save state</td></tr><tr><td>HOTKEY + NORTH</td><td>Load state</td><td>Load state</td></tr><tr><td>HOTKEY + UP / DOWN</td><td>Change slot</td><td></td></tr><tr><td>HOTKEY + LEFT</td><td>Slow motion</td><td></td></tr><tr><td>HOTKEY + RIGHT</td><td>Fast forward</td><td></td></tr><tr><td>HOTKEY + R3</td><td>Screenshot</td><td></td></tr><tr><td>HOTKEY + L3</td><td>Pause</td><td></td></tr></tbody></table>

With Play!, the state uses the slot chosen in RetroBat before the launch: it does not change during the game.

### Light guns

pcsx2x6 supports 2 guns for *Time Crisis 3*, *Time Crisis 4*, *Vampire Night* or *Cobra The Arcade*. Enable **ENABLE GUN** (GUNS submenu).

* Coins and Start: keys 5/6 and 1/2. With a Mayflash DolphinBar, D-pad left = coin, D-pad right = start.
* **SINDEN BORDER**: border for Sinden guns (enabled automatically when a Sinden gun is detected).
* **CROSSHAIR**: mouse cursor or custom crosshair.

**Play!** supports one gun (player 1) for *Time Crisis 3*, *Time Crisis 4*, *Cobra The Arcade* and *Vampire Night*: the aim follows the mouse cursor. With **ENABLE GUN**: trigger = left click, pedal = right click (*Time Crisis*, *Cobra*), Start = key 1, coin = key 5. The buttons are in the `<game>_gun` blocks of `play.yml`.

### Wheels

pcsx2x6 configures the following wheels automatically when **ENABLE WHEEL** is on (WHEELS submenu): Logitech G29, Logitech G923 (PS), Logitech Driving Force GT, Thrustmaster T300RS (PS3), Moza R5.

* **ENABLE FORCE FEEDBACK**: force feedback.
* **GEARUP/GEARDOWN TO GEAR3/GEAR4 CONVERTER**: sequential shifting on games using a gear stick.
* **FORCE WHEEL 1 INDEX**: if RetroBat selects the wrong wheel.

## Folders

<table><thead><tr><th width="138.25">Emulator</th><th>Content</th><th>Folder</th></tr></thead><tbody><tr><td>pcsx2x6</td><td>Dongles (.ps2) and memory cards</td><td><code>saves\namco2x6\memcards</code></td></tr><tr><td>pcsx2x6</td><td>Machine settings (sram.bin)</td><td>game subfolder in <code>roms\namco2x6</code></td></tr><tr><td>pcsx2x6</td><td>Save states</td><td><code>saves\namco2x6\namco2x6\sstates</code></td></tr><tr><td>pcsx2x6</td><td>Screenshots</td><td><code>screenshots\pcsx2x6</code></td></tr><tr><td>play</td><td>Data and input profiles</td><td><code>emulators\play\Play Data Files</code></td></tr><tr><td>play</td><td>Arcade profiles</td><td><code>emulators\play\arcadedefs</code></td></tr><tr><td>play</td><td>Save states</td><td><code>saves\namco2x6\play\states</code></td></tr><tr><td>play</td><td>Buttons per game</td><td><code>system\resources\inputmapping\play.yml</code> (custom copy in <code>user\inputmapping</code>)</td></tr></tbody></table>

## Guides

### Service menu (test mode)

Arcade games are configured in their service menu: free play, difficulty, number of rounds, controls test… Enable **ENABLE SERVICE MENU** (EMULATION submenu), launch the game and press R3 (or 0 on the keyboard). The settings are saved in the `sram.bin` file of the game.

<div align="left"><figure><img src="https://990680527-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FexdzL60ZuqPLldz2AYta%2Fuploads%2FDIw0XiD3Gi8TXWoW8DjR%2Fimage.png?alt=media&amp;token=1979d73c-bdf4-47e8-9f67-3719561bbc2d" alt=""><figcaption></figcaption></figure></div>

### Soulcalibur II Conquest mode

The Conquest mode uses a second memory card. Add `card=ConquestCard0.conquestcard` to the `[data]` section of the .acgame file and put the card in `saves\namco2x6\memcards`. At first use, open the service menu and select DATA CLEAR > Clear All, then exit and save: the card is formatted at the next boot.

### Improving graphics

Use **INTERNAL RESOLUTION** (pcsx2x6 and Play!) to render the games in high definition, and the PCSX2 visual options (VISUAL RENDERING submenu).

## Known issues

<table><thead><tr><th width="300.25">Problem</th><th>Solution</th></tr></thead><tbody><tr><td>"No BIOS found in bios/pcsx2/bios folder."</td><td>Copy r27v1602f.8g (or r27v1602f.7d) to <code>bios\pcsx2\bios</code>.</td></tr><tr><td>A System 256 game does not start</td><td>Use the System 256 BIOS: FORCE BIOS = SYSTEM 256.</td></tr><tr><td>The game stops at the dongle check</td><td>Check that the .ps2 file is in <code>saves\namco2x6\memcards</code> and named like the <code>dongle</code> entry (or <code>GAMEID.ps2</code>).</td></tr><tr><td>The game starts in the service menu</td><td>Disable ENABLE SERVICE MENU.</td></tr><tr><td>Play! does not find the game</td><td>The .zip (or .m3u) must have the exact name of the Play! arcade profile.</td></tr><tr><td><em>Soulcalibur II</em> hangs on a white screen</td><td>Format the Conquest card (see Guides).</td></tr><tr><td>The service menu does not open with Play!</td><td>Press R3. In <em>Tekken</em>, <em>Pride GP 2003</em> and <em>Super Dragon Ball Z</em>, press R3 and the button 5 (see Play! controls).</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/arcade/namco2x6.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
