> For the complete documentation index, see [llms.txt](https://wiki.retrobat.org/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/arcade/gaelco.md).

# Gaelco

Gaelco, S.A.

<div align="left"><figure><img src="https://990680527-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FexdzL60ZuqPLldz2AYta%2Fuploads%2FtGJfRAQLdnRcVvfIUYWL%2Fimage.png?alt=media&amp;token=55d1c54f-24e4-496b-8643-92b011504121" alt="" width="341"><figcaption></figcaption></figure></div>

## Overview

**Gaelco** is a Spanish arcade developer based in Barcelona, known for Big Karnak, World Rally or Radikal Bikers. In the early 2000s, its 3D games run on boards built around a PowerVR graphics chip (Neon 250 card).

The RetroBat **Gaelco PowerVR** system gathers these games: **Smashing Drive** (2000), **ATV Track** (2002) and **Gaelco Football** (2002).

RetroBat offers two emulators: **Odin** (default), a low-level emulator of the Gaelco and Hikaru boards, and **Demul**.

{% embed url="<https://en.wikipedia.org/wiki/Gaelco>" %}

## At a glance

<table><thead><tr><th width="265.25"></th><th></th></tr></thead><tbody><tr><td><strong>Games folder</strong></td><td><code>roms\gaelco</code></td></tr><tr><td><strong>Extensions</strong></td><td>.zip</td></tr><tr><td><strong>Default emulator</strong></td><td>odin</td></tr><tr><td><strong>BIOS</strong></td><td>None</td></tr><tr><td><strong>Controller configuration</strong></td><td>Automatic, all emulators</td></tr><tr><td><strong>Save states</strong></td><td>Odin; Demul through hotkeys</td></tr><tr><td><strong>RetroAchievements</strong></td><td>No</td></tr><tr><td><strong>Netplay</strong></td><td>No</td></tr><tr><td><strong>Wheels</strong></td><td>Odin (ATV Track, Smashing Drive)</td></tr></tbody></table>

## Which emulator to choose?

<table><thead><tr><th width="154.5">Emulator</th><th>Strengths</th><th>Limits</th></tr></thead><tbody><tr><td><strong>odin</strong> (default)</td><td>Low-level emulator of the Gaelco boards: all three games, controls set per game, higher resolution, CRT filters of the Gaelco monitors, save states, force feedback wheel, controller rumble.</td><td>Gaelco support is brand new (Odin 0.1.1).</td></tr><tr><td><strong>demul</strong></td><td>Long-standing emulator, also used for the Naomi and the Atomiswave.</td><td>Same button layout for every game. Save states not managed by RetroBat.</td></tr></tbody></table>

MAME does not emulate these games yet (flagged as not working and without sound).

## BIOS

No BIOS is needed.

## Which game format?

Games are MAME `.zip` archives, to be kept as they are, without extracting or renaming them (`atvtrack.zip`, `gfootbal.zip`, `smashdrv.zip`).

The `atvtracka`, `smashdrvb` and `smashdrvs` versions need their parent game (`atvtrack`, `smashdrv`) in the same folder, unless you use a non-merged romset.

## Controls

### Automatic configuration

RetroBat configures the controllers automatically for both emulators. The **AUTOCONFIGURE CONTROLLERS** option lets you keep your own configuration.

For every game: **SELECT** = coin, **L3** = Service, **R3** = Test. On the keyboard: 1 = Start, 5 = coin, 9 = Service, 0 = Test. Gaelco cabinets have a single coin input and a single Service button.

### Odin

Buttons are set per game in `odin.yml` (`system\resources\inputmapping`, editable copy in `user\inputmapping`):

<table><thead><tr><th width="330.25">Game</th><th>Controls</th></tr></thead><tbody><tr><td>ATV Track (<code>atvtrack</code>, <code>atvtracka</code>)</td><td>Left stick: handlebar; R2: throttle; L2 / R1: left / right brakes; START: Start</td></tr><tr><td>Gaelco Football (<code>gfootbal</code>), 2 players</td><td>D-pad or left stick: move; SOUTH, EAST, WEST: buttons 1, 2, 3; right stick: kick the ball (pull the stick back first to lift the ball); START: Start</td></tr><tr><td>Smashing Drive (<code>smashdrv</code>, <code>smashdrvb</code>, <code>smashdrvs</code>)</td><td>Left stick: steering; R2 / L2: gas / brake; START: horn (Start); D-pad up / down: volume</td></tr></tbody></table>

In Gaelco Football, the right stick kicks: **R3** does not open the test menu, use the **0** key of the keyboard.

Options of the **CONTROLS** menu:

* **JOYSTICK DEADZONE**: deadzone of the sticks (3 % by default).
* **ENABLE RUMBLE**: the controller shakes like the cabinet, for example the shaking seat of ATV Track (on by default).
* **EXTERNAL OUTPUTS**: sends the lamps and the drive board to external tools (Hook Of The Reaper, QMamehook...).

### Demul

Demul uses the same layout for every game:

<table><thead><tr><th width="270.25">Cabinet button</th><th>Controller</th></tr></thead><tbody><tr><td>Buttons 1 to 4</td><td>SOUTH, EAST, WEST, NORTH</td></tr><tr><td>Buttons 5 to 8</td><td>L1, R1, L2, R2</td></tr><tr><td>Analog controls</td><td>Left stick and right stick</td></tr><tr><td>Directions</td><td>D-pad</td></tr><tr><td>Start</td><td>START</td></tr></tbody></table>

The **CONTROLS > ANALOG DEADZONE** option sets the deadzone of the sticks.

### Wheels

ATV Track and Smashing Drive are played with a wheel in Odin, with force feedback. Enable **WHEELS > ENABLE WHEEL**: the wheel becomes player 1.

* ATV Track: the wheel is the handlebar; the brake pedal and the right paddle work the right brake, the left paddle the left brake.
* **WHEEL ROTATION**: degrees of rotation to reach full lock (270° by default).
* **FORCE FEEDBACK STRENGTH**: from 50 to 200 %, or off.
* Buttons are set per wheel type in `model3_wheels.yml` (the same file as Supermodel). Odin reads `odin_wheels.yml` first if it exists.

For more details on wheels, see the [**Wheels**](https://wiki.retrobat.org/controllers/supported-controllers/wheels.md) page.

### Hotkeys

#### **Odin**

<table><thead><tr><th width="192">Hotkey</th><th>Action</th><th>Keyboard</th></tr></thead><tbody><tr><td><strong>HOTKEY + START</strong></td><td>Quit</td><td>Escape</td></tr><tr><td><strong>HOTKEY + SOUTH</strong></td><td>Odin menu</td><td>F10</td></tr><tr><td><strong>HOTKEY + WEST</strong></td><td>Save state</td><td>F2</td></tr><tr><td><strong>HOTKEY + NORTH</strong></td><td>Load state</td><td>F4</td></tr><tr><td><strong>L3</strong> / <strong>R3</strong></td><td>Service / Test</td><td>9 / 0</td></tr><tr><td>—</td><td>Pause</td><td>P</td></tr><tr><td>—</td><td>Reset</td><td>Ctrl + R</td></tr><tr><td>—</td><td>Fullscreen</td><td>F11 or Alt + Enter</td></tr></tbody></table>

Odin's own controller shortcuts also stay available with the **Guide** button: Guide alone = menu, Guide + SELECT = pause, Guide + R1 / L1 = save / load, Guide + START = quit. Keyboard keys can be customized, see the [**Hotkeys**](https://wiki.retrobat.org/navigation/hotkeys.md) page.

#### **Demul**

<table><thead><tr><th width="193.25">Hotkey</th><th>Action</th><th>Keyboard</th></tr></thead><tbody><tr><td><strong>HOTKEY + START</strong></td><td>Quit</td><td></td></tr><tr><td><strong>HOTKEY + WEST</strong></td><td>Demul save state</td><td>F2</td></tr><tr><td><strong>HOTKEY + NORTH</strong></td><td>Demul load state</td><td>F4</td></tr><tr><td><strong>HOTKEY + L3</strong></td><td>Fullscreen</td><td>Alt + Enter</td></tr></tbody></table>

Demul save states stay in Demul: they do not show up in the save state manager.

## Folders

| Content                                           | Folder                                                                                            |
| ------------------------------------------------- | ------------------------------------------------------------------------------------------------- |
| Odin: NVRAM (cabinet settings and high scores)    | `saves\gaelco\odin`                                                                               |
| Odin: save states (managed by RetroBat)           | `saves\gaelco\odin\sstates`                                                                       |
| Odin: save states (emulator folder, one per game) | `saves\gaelco\odin\states`                                                                        |
| Odin: configuration                               | `emulators\odin\odin.ini`                                                                         |
| Odin: log (launch errors)                         | `emulators\odin\odin.log`                                                                         |
| Odin: button mapping                              | `system\resources\inputmapping\odin.yml` (editable copy in `user\inputmapping`)                   |
| Odin: wheel buttons                               | `system\resources\inputmapping\wheels\model3_wheels.yml` (or `user\inputmapping\odin_wheels.yml`) |
| Demul: NVRAM                                      | `saves\gaelco\demul`                                                                              |
| Demul: configuration                              | `emulators\demul\Demul.ini`, `padDemul.ini`                                                       |

## Guides

### Service menu

The test menu of each cabinet gives access to the game settings (difficulty, credits, volume...). **R3** (or **0** on the keyboard) opens the test menu, **L3** (or **9**) moves in it.

### Smashing Drive volume (Odin)

Smashing Drive sets its volume at each power-on (75 by default). Change it with D-pad up / down during the game.

### Save states (Odin)

Odin keeps a single save state per game, replaced at each **HOTKEY + WEST**. RetroBat copies each new state to a new slot: you find them all in the save state manager and can start the game from any of them.

### Other useful options (Odin)

<table><thead><tr><th width="305.25">Option</th><th>Effect</th></tr></thead><tbody><tr><td><strong>INTERNAL RESOLUTION</strong></td><td>Raises the rendering resolution (up to 6x).</td></tr><tr><td><strong>VISUAL RENDERING > CRT FILTER</strong></td><td>Look of a Gaelco monitor (28 or 34 inch).</td></tr><tr><td><strong>AUDIO > SOUND BOARDS</strong></td><td>Woofer of the Gaelco cabinets: main board only, mix or 4 channels.</td></tr><tr><td><strong>USE EMULATOR BEZELS</strong></td><td>Bezels of the Odin-Artwork pack (to be extracted in <code>emulators\odin</code>) instead of the RetroBat decorations.</td></tr><tr><td><strong>DRIVERS > VIDEO</strong></td><td>OpenGL (default) or Vulkan.</td></tr></tbody></table>

#### **Demul**

**INTERNAL RESOLUTION**, **GAME ASPECT RATIO** (4:3, 16:9 or stretched). Demul always uses its old graphics plugin for these games.

## Known issues

<table><thead><tr><th width="349">Issue</th><th>Solution</th></tr></thead><tbody><tr><td><code>atvtracka</code>, <code>smashdrvb</code> or <code>smashdrvs</code> does not start</td><td>Put the parent game (<code>atvtrack</code>, <code>smashdrv</code>) in <code>roms\gaelco</code>, or use a non-merged romset.</td></tr><tr><td>Gaelco Football: R3 does not open the test menu</td><td>The right stick kicks: use the <strong>0</strong> key of the keyboard.</td></tr><tr><td>Odin is not shown on the right monitor</td><td>Enable <strong>VIDEO > DISABLE FULLSCREEN</strong>.</td></tr></tbody></table>


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://wiki.retrobat.org/systems-and-emulators/supported-game-systems/arcade/gaelco.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
